Electronic switch with voltage indicator

The power switch has been developed to replace the mechanical switch the receiver power supply in nitro cars.


The switch is used to turn on or off the receiver power supply in the vehicle.


In addition, it informs you about the battery level or failure in the power supply.


Note: The power switch is a pure switch, i.e. the voltage of the connected battery is transmitted when switched state directly to the output
.

So if you need to use as a LiPo battery with 7.4V you that to make sure your receiver and your servos with the higher voltage are compatible!


 


 

load


 

Based on the latest technology MosFET the power switch, despite its small size, extremely durable.


Therefore, the use in large models with up to 3 servos is not a problem.


Power consumption: Due to the very low power consumption of the power switch some time may be plugged into the battery easily without these completely unload
.

As an example: A fully charged 1600mAh battery would be empty after about 950 days
.

 


 

Features:


 

& bull; Robust and reliable electronic switch for the receiver power supply of nitro cars


& Bull; Fully sealed for protection against dust and water


& Bull; Programmable for 2S LiPo, LiFe 2S and 5 cell NiMH battery


& Bull; Exact charging status indicator with 3 LEDs


& Bull; Error detection loose contact /
poor battery

& Bull; Very low internal resistance for minimal losses


& Bull; Extremely low power consumption in off mode


& Bull; Very high current capability


 


 

Specifications


 

Operating Voltage 3.5 - 10V


max. current 10A


Power consumption (off) about 69 & micro; A


° operating temperature range -10 C to + 50 ° C,


Dimensions (L x W x T) 25 x 17 x 7.6mm (without cable)


Weight approx 9g